Firewall APU1D

You are here

215,00 € Exc. VAT
258,00 € Inc. VAT
firewall apu1D4 front view
buy APU1D4 firewall appliance
Disk - CF
Select the disk(s) that will be installed in your appliance.
Operating System
Select the system you wish to have installed.
Professional support
Select an optional support for the pfSense® or OPNSense® software.
Professional support by OSNet team.
Hardware warranty extension
Wireless Module
Select your optional wireless module
Select optional cabling needed to help administer your appliance.
Remote login option.
Remote login facility compatible with European regulations.

Discover the new APU1D based on AMD G series CPU  1GHz with 64 bit support and 512Mo L2 cache - 2Go of DDR3 RAM - 3 Realtek GbE interfaces.

Small… but powerfull !!


Firewall is delivered with the following :

  • 1 Firewall APU1D
  • 1 enclosure
  • 1 power cable


firewall apu1D4 front view
buy APU1D4 firewall appliance

Presentation of WLE200nx WiFi card.

PDF Produit: 

Enclosed in the APU1D:

  • CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K data + 32K instruction + 512K L2 cache per core
  • DRAM: 2 or 4 GB DDR3-1066 DRAM
  • Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA + power connector.
  • 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
  • Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
  • I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton
  • Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
  • Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E
  • Firmware: CoreBoot.
  • Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).


As an option :

  • mSATA 16GB CompactFlash card, Skymedi SK6368 controller


  • WiFi Compex WLE200NX card :
  • Atheros XB92 reference design
  • Atheros XSPAN family chipset,P/N AR9280
  • IEEE 802.11n compliant and backward compatible with 802.11a/b/g (802.11n not compatible with pfSense® software)
  • Dual-band 2 x 2 MIMO spatial multiplexing technique
  • Maximum output power 18dBm@802.11a / 20dBm MIMO aggregate
  • Supports up to 300Mbps physical data rates


Firewall tested and compatible with pfSense® system v.2.x  --  64 bits.