Firewall APU 4G

405,00 € Exc. VAT

486,00 € Inc. VAT

Professional support

Select an optional support for the pfSense® or OPNSense® software.
Professional support by OSNet team.

Warranty

Hardware warranty extension

Wireless Module

Select your optional wireless module

Cable

Select optional cabling needed to help administer your appliance.

Câble DB9 - DB9 null modem (+10,00€ Exc. VAT)

Alimentation 12v ou 18v. supplémentaire pour boîtier Alix ou APU (+12,00€ Exc. VAT)

Dongle Série USB : Unix - BSD - Mac - PC (+25,00€ Exc. VAT)

Remote login option.

Remote login facility compatible with European regulations.

Conservation des logs - 1 an (max 10Go) (+700,00€ Exc. VAT)

pfSense® or OPNSense® software training

Select your training session

FIREWALL APU 4G is delivered with the following components :

1x Firewall APU 2C2
1x 4G network card compatible with the following network bands :
- LTE (FDD) B1/B2/B3/B5/B7/B8/B20
- DC-HSPA+/HSPA+/HSPA/UMTS dual-band B1/B2/B5/B8
- EDGE/ GPRS/ GSM quad-band 850/900/1800/1900 MHz
1x mSATA 16GB storage card
1x blue anodised desktop enclosure : 168 mm x 157 mm x 30 mm
1x 12v PSU
OPNSense® software included

4G network plan and associated SIM card are not included in this offer and must be bought separetly by the end-user.

All of our products are sold mounted with a userguide and ready to work.

TECHNIcal specifications :

4G network card compatible with the following bands :
- LTE (FDD) B1/B2/B3/B5/B7/B8/B20
- DC-HSPA+/HSPA+/HSPA/UMTS dual-band B1/B2/B5/B8
- EDGE/ GPRS/ GSM quadri-bande 850/900/1800/1900 MHz
4G data transfer :
- DC-HSPA+ : Downlink:42 Mbps, Uplink: 5.76 Mbps
- LTE FDD: Downlink:100 Mbps, Uplink: 50 Mbps @Bandwidth 20M (CAT3)
Two antennas and pigtail compatible with :
- Wifi/Bluetooth 2400
- LTE 699-960/1710-2690
- UMTS 2100
- GSM 850/900/1800/1900
Tested and validated with Orange network and other EU network operators

CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
DRAM: 2 or 4 GB DDR3-1333 DRAM
Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector.
12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
Connectivity: 3 Gigabit Ethernet channels (Intel i211AT on apu2b2, i210AT on apu2b4)
I/O: DB9 serial port, 2 USB 3.0 external + + 2 USB 2.0 internal, three front panel LEDs, pushbutton
Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
Firmware: coreboot (please contact support@pcengines.ch for source code if desired).
Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).

Usage scope :

As a stand-alone 4G device with a wired or wireless network connected behind.
As a 4G backup unit used with a wired line (such as xDSL line or fiber lines).
As a monitoring device deployed in a data-center (so you can access your devices if network is out of order).
With any mixed usage that you can thing of involving standard GbE network ports and 4G / 3G network card.